Wika IPT-11 Instrukcja Użytkownika Pobierz pdf (Strona 28)

5 Conﬁrm with [+] and move to max. adjustment with [->].

The min. adjustment is ﬁnished.

Information:

For an adjustment with ﬁlling, you simply enter the displayed actual

measured value. If the adjustment ranges are exceeded, the message

"Outside parameter limits" appears. The editing procedure can be

aborted with [ESC] or the displayed limit value can be accepted with

[OK].

Proceed as follows:

1 Edit the % value in the menu item "Max. adjustment" with [OK].

Max. adjustment

+100.0 %

+1000.0 mbar

0000.0 mbar

Information:

The displayed pressure for 100 % corresponds to the nominal

measuring range of the sensor (in the above example 1 bar =

1000 mbar).

2 Set the requested percentage value with [->] and [OK].

3 Edit the requested mbar value with [OK].

4 Set the requested mbar value with [+] and [->].

5 Conﬁrm with [OK] and move to the menu overview with [ESC].

The max. adjustment is ﬁnished.

Information:

For an adjustment with ﬁlling, you simply enter the displayed actual

measured value. If the adjustment ranges are exceeded, the message

"Outside parameter limits" appears. The editing procedure can be

aborted with [ESC] or the displayed limit value can be accepted with

[OK].

Process pressure measurement

Set up IPT-1* in the following sequence:

1 Select application "Process pressure measurement"

2 Select the unit of measurement

3 Carry out position correction

4 Carrying out zero adjustment

5 Carrying out span adjustment

In the menu item "Adjustment unit" you select the physical unit in which

the adjustment should be carried out, e.g. mbar, bar, psi…

Carrying out max. ad-

justment

Parameter ad-

justment "Proc-

ess pressure

measurement"

28 Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • 4 … 20 mA/HART

6 Set up with the indicating and adjustment module

31543-EN-090130

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

Wika IPT-11 Instrukcja Użytkownika Strona 28

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Wika IPT-11