Wika TR31 Instrukcja Użytkownika Pobierz pdf (Strona 17)

WIKA operating instructions models TR31-3, TR31-K

14096788.01 07/2014 GB/D

5. Transport, packaging and storage

5.1 Transport

Check the instrument for any damage that may have been caused by

transport. Obvious damage must be reported immediately and damaged

instruments must not be used.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport

(e.g. change in installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage:

■

Storage temperature:

- M12 x 1, 4-pin circular connector: -40 ... +85 °C (-40 ... +185 °F)

- Directly connected cable: -20 ... +80 °C (-4 ... +176 °F)

■

Humidity: 5 ... 95 % r. h.

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

■

Potentially explosive environments, ammable atmospheres

Store the instrument in its original packaging in a location that fulls the

conditions listed above. If the original packaging is not available, pack

and store the instrument as described below:

1. Wrap the instrument in an antistatic plastic lm.

2. Place the instrument along with shock-absorbent material in the

packaging.

3. If stored for a prolonged period of time (more than 30 days), place a

bag containing a desiccant inside the packaging.

WARNING!

Before storing the instrument (following operation), remove

any residual media. This is of particular importance if

the medium is hazardous to health, e.g. caustic, toxic,

carcinogenic, radioactive, etc.

5. Transport, packaging and storage

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Brak uwag

Wika TR31 Instrukcja Użytkownika Strona 17